Elotex redispersible powders can be blended in all commercial positive mixers with other dry additives to produce finished products in powder form. Since Elotex redispersible powders exhibit thermoplastic behaviour, mixing times should be as short as possible, and significant temperature rise caused by strong shear forces should be avoided. All hydraulically and non-hydraulically curing dry mixtures with Elotex redispersible powder may be easily mixed with water before application.

For mixing finished products in powder form, one usually places the required amount of mixing water in a suitable vessel and add the powder mixture under agitation. Too intensive agitation of the mixture may result in unwanted air inclusion. Before application, one should allow the mixture to stand for a short time.

Depending on the properties of the other additives, the standing time will be in the range of approx. 1-5 minutes.

ELOTEX® 60W is a very hard redispersible polymer powder based on a copolymer of vinyl acetate ... ELOTEX® 60W a multi-purpose product with neutral rheology.
ELOTEX® 60W is a very hard redispersible polymer powder based on a copolymer of vinyl acetate ... ELOTEX® 60W a multi-purpose product with neutral rheology.